Click on this link if you need more information about a calibrator.
OMEGA’s hot point® calibrator is part of a new family of calibrators which allows calibration of thermistor, thermocouple and RTD probes quickly and easily with an accuracy to ±0.8°C (±1.5°F). An integral RTD sensor assures high measurement accuracy and repeatability. A built-in microprocessor-based PID digital controller assures exceptional stability. Setpoint and actual temperature are displayed, simultaneously. Temperature can be set in one degree increments from Ambient +22 to 482°C (Ambient +40 to 900°F).
The CL900A calibrator accepts a variety of optional inserts which are available in 100 mm and 150 mm depths, and a wide variety of metric and imperial probe diameters. An undrilled insert is also available. The CL900A comes standard with a 1/4" diameter, 150 mm deep insert well, and insert removal tongs. Additional inserts can be ordered separately as required for other diameter probes. 150 mm depth inserts are used for probes 175 mm and longer. 100 mm depth inserts are used for probes 125 mm and longer.
The CL950A-M has a fixed thermal well with 150 mm deep holes for 2, 3, 4.5 and two 6 mm diameter probes. The CL950A has a fixed thermal well with 6 inch deep holes for 1/16, 1/8, 3/16 and two 1/4 inch diameter probes.
For complete product specifications see the Related Links section at the bottom of this page.
† All amounts shown in EUR, GBP, or USD Ordering Example: (1) CL900A-220 hot point® calibrator, 230 Vac, £2,555.00 plus (1) CL901-M 100 mm deep test well insert for 2 mm dia probes, £69.00, £2,555.00 + 69.00 = £2,624.00